Ceiling Medallion Canopy Info

The medallion goes on the ceiling first then the lighting fixture or fan is installed. Generally the hole in the medallion only needs to be wide enough to pass the electrical wires through. The typical hole size is 3″ to 4″. After the medallion is secured to the ceiling with construction adhesive and a few nail / screws the fixture is installed and the canopy is centered then attached to cover the hole in the medallion. For the final touch apply a white caulking around the outer edge for a clean look.

Our Medallions come in 1 or 2 piece version’s. If you do not wish to totally take down your light fixture or fan just loosen and release the canopy and install a 2-piece medallion. Then secure the canopy on top of the medallion.

If you wish to discuss your option please call 781-249-0957 to talk to an expert.

Please click here for our full ceiling medallion installation instructions.